• R. Brown, A. Shukla and K.R. Natarajan, (2002). Fiber Reinforcement of Concrete Structures. URITC Project No. 536101. University of Rhode Island, Kingston, Transportation Center.
• Dupont David, (2003).
  Modelling and Experimental Validation of the Constitutive Law (σ-ε) and Cracking
  Behaviour of Steel Fibre Reinforced Concrete.
  PhD Thesis, Katholieke Universiteit Leuven, Belgium.
• Brown, Michael Carey, (1999).
  Assessment of Commercial Corrosion Inhibiting Admixtures for Reinforced Concrete
  MSc. Thesis, Virginia Polytechnic Institute and State University, Blacksburg, Virginia.
• Concrete Basics - A Guide to Concrete Practice, (2004). Concrete Basics addresses the needs of unskilled and
  semi-skilled persons undertaking general concrete work by providing clear, concise explanation of all aspects of making quality concrete; from the Materials and Properties involved through Planning, Preparation, Finishing and Curing. Available from Cement Concrete & Aggregates Australia.
• Giude to Concrete for housing, (2007). This Guide is written primarily for house builders and tradespeople working with concrete, mortar and render. It provides practical information about the use of concrete; mortar and render in houses and other small buildings. It includes floors, driveways, paths and patios. Available from Cement Concrete & Aggregates Australia.
• Long T. Phan and Nicholas J. Carino, (2000). Fire Performance of High Strength Concrete: Research Needs. Proceedings ASCE/SEI Structures Congress 2000. Building and Fire Research Laboratory, National Institute of Standars and Technology.
• Banta, Timothy E. , (2005).
  Horizontal Shear Transfer between Ultra High Performance Concrete and Lightweight Concrete.
  MSc. Thesis, Virginia Polytechnic Institute and State University, Blacksburg, Virginia.
• Trent, Justin David, (2007). Transfer Length, Development Length, Flexural Strength, and Prestress Loss Evaluation in Pretensioned Self-Consolidating Concrete Members.
  MSc Thesis. Virginia Polytechnic Institute and State University. Blacksburg, Virginia.
• Ordija, James Louis, (2006).
  Structural Performance of Fiber-Reinforced and Welded Wire Fabric-Reinforced Concrete Composite Slabs
  MSc Thesis. Virginia Polytechnic Institute and State University. Blacksburg, Virginia.
• Mata, Luis A., (2004).
  Implementation of Self-Consolidating Concrete (SCC) for Prestressed Concrete Girders.
  MSc Thesis, North Carolina State University, Department of Civil, Construction and Environmental Engineering.
• Ouchi, M., Nakamura, S., Osterson, T., Hallberg, S., and Lwin, M., (2003). Applications of Self-Compacting Concrete in Japan, Europe and the United States. ISHPC, pp 1-20.
• Mohammed Abdul Hameed, (2005).
  A study of Mix Design and Durability of Self Compacting Concrete.
  MSc Thesis, King Fahd University of Petroleum and Minerals, Saudi Arabia.
• Levesque Adam Paul, (2006).
  Fire Performance of Reinforced Concrete Slabs.
  MSc Thesis. Civil & Environmental Engineering, Worcester Polytechnic Institute.
• Chen Dong, (2006).
  Computational Framework For Durability Assessment Of Reinforced Concrete Structures Under Coupled Deterioration Processes.
  PhD Thesis, Civil Engineering, Graduate School of Vanderbilt University. Nashville, Tennessee.
• Aguiniga Gaona Francisco, (2004).
  Characterization of design parameters for fiber reinforced polymer composite reinforced concrete systems
  PhD. Thesis, Civil Engineering, Texas A&M University.
• Powanusorn Suraphong, (2005).
  Effect of confinement on shear dominated reinforced concrete elements.
  PhD Thesis, Civil Engineering, Texas A&M University.
• Evan C. Bentz, (2000).
  Sectional Analysis of Reinforced Concrete Members.
  PhD Thesis, Department of Civil Engineering, University of Toronto.
• Chapman J.R. and Driver R.G., (2006). Behaviour of Collared Concrete Columns Under Concentric or Eccentric
  Loads. Structural Engineering Report No. 263, Department of Civil and Environmental Engineering, University of
  Alberta, Canada.
• Deniaud C. and Cheng J.J.R., (2000). Behaviour of Reinforced Concrete Beams strengthened in Shear. Structural Engineering Report No. 234, Department of Civil and Environmental Engineering, University of Alberta, Canada.
• Ospina C.E. and Alexander S.D.B., (1997). Transmission of High Strength Concrete Column Loads Through Concrete Slabs. Structural Engineering Report No. 214, Department of Civil and Environmental Engineering, University of Alberta, Canada.
• Iravani S. and MacGregor J.G., (1994). High Performance Concrete Under High Sustained Compressive Stresses. Structural Engineering Report No. 200, Department of Civil and Environmental Engineering, University of Alberta, Canada.
• Bartlett F.M. and MacGregor J.G., (1994). Assessment of Concrete Strength in Existing Structures. Structural
  Engineering Report No. 198, Department of Civil and Environmental Engineering, University of Alberta, Canada.
• Mulenga M.N. and Simmonds S.H., (1993). Frame Methods for Analysis of Two-Way Slabs. Structural Engineering Report No. 183, Department of Civil and Environmental Engineering, University of Alberta, Canada.
• Elezaby Y.K. and Simmonds S.H., (1992). Modelling and Design of Unbraced Reinforced Concrete Frames.
  Structural Engineering Report No. 175, Department of Civil and Environmental Engineering, University of
  Alberta, Canada.
• Kriviak G.J. and Scanlon A., (1986). Bayesian Analysis of In-Situ Test Data for Estimating the Compressive Strength of Concrete in Existing Structures. Structural Engineering Report No. 140, Department of Civil and Environmental Engineering, University of Alberta, Canada.
• Tam K.S.S. and Scanlon A., (1984). The Effects of Restrained Shrinkage on Concrete Slabs. Structural
  Engineering Report No. 122, Department of Civil and Environmental Engineering, University of Alberta, Canada.
• Graham C. and Scanlon A., (1984). Deflections of Two-way Slabs Under Construction Loading. Structural
  Engineering Report No. 117, Department of Civil and Environmental Engineering, University of Alberta, Canada.
• Leung C-K. and Simmonds S.H., (1984). Reinforced Concrete Column Design Program. Structural Engineering
  Report No. 116, Department of Civil and Environmental Engineering, University of Alberta, Canada.
• Rogowsky D.M. and MacGregor J.G., (1983). Shear Strength of Deep Reinforced Concrete Continuous Beams.
  Structural Engineering Report No. 110, Department of Civil and Environmental Engineering, University of
  Alberta, Canada.
• Rogowsky D.M., MacGregor J.G., and Ong S.Y. (1983). Tests of Reinforced Concrete Deep Beams. Structural
  Engineering Report No. 109, Department of Civil and Environmental Engineering, University of Alberta, Canada.
• Sezen H., and Moehle J.P., (2004). Shear Strength Model for Lightly Reinforced Columns. ASCE Journal of
  Structural Engineering. Vol. 130, No. 11, 1692-1703.
• Rogowsky D.M. and Simmonds S.H., (1980). Plastic Design of Reinforced Concrete Slab. Structural Engineering Report No. 94, Department of Civil and Environmental Engineering, University of Alberta, Canada.
• Neil M. Hawkins, Daniel A. Kuchma, Robert F. Mast, M. Lee Marsh, Karl-Heinz Reineck, (2005). NCHRP Report
  549. Simplified Shear Design of Structural Concrete Members. Transportation Research Board. National
  Cooperative Highway Research Program. Washington.
• Mohamad A. Nagi, Paul A. Okamoto, Ronald L. Kozikowski, Kenneth Hover, (2007). NCHRP Report 578.
  Evaluating Air-Entraining Admixtures for Highway Concrete. Transportation Research Board. National
  Cooperative Highway Research Program. Washington.
• Foster S.J., Gilbert R.I., (1996). Tests on High Strength Concrete Deep Beams. UNICIV Report R-354. School of Civil & Environmental Engineering, The University of New South Wales, Sydney, Australia.
• Nejadi S., Gilbert R.I., (2004). Shrinkage cracking in restrained reinforced concrete members. UNICIV Report R-433. School of Civil & Environmental Engineering, The University of New South Wales, Australia.
• Gilbert R.I., Nejadi S., (2004).
  An experimental study of flexural cracking in reinforced concrete members under short term loads.
  UNICIV Report R-434. School of Civil & Environmental Engineering, The University of New South Wales, Australia.
• Gilbert R.I., Nejadi S., (2004).
  An experimental study of flexural cracking in reinforced concrete members under sustained loads.
  UNICIV Report R-435. School of Civil & Environmental Engineering, The University of New South Wales, Australia.
• Voo J.Y.L., Foster S.J., (2003). Variable engagement model for fibre reinforced concrete in tension. UNICIV
  Report R-420. School of Civil & Environmental Engineering, The University of New South Wales, Sydney, Australia.
• Y.F. Wu, M.C. Griffith, D.J. Oehlers, (2001). Behavior of Plated RC Columns. Research Report No. R173.
  Department of Civil and Environmental Engineering, The University of Adelaide, Australia.
• Sung-Moo Park & Deric J. Oehlers, (2000). Details of Tests on Steel and FRP Plated Continuous Reinforced
  Concrete Beams. Research Report No. R170. Department of Civil and Environmental Engineering, The University
  of Adelaide, Australia.
• K.W. Wong, R.F. Warner, (1998). Non-linear Design of Reinforced Concrete Columns and Frames. Research
  Report No. R164. Department of Civil and Environmental Engineering, The University of Adelaide, Australia.
• K.W. Wong, R.F. Warner, (1998). Non-linear Design of Continuous Reinforced Concrete Flexural Members.
  Research Report No. R161. Department of Civil and Environmental Engineering, The University of Adelaide, Australia.
• K.W. Wong, R.F. Warner, (1997).
  Non-linear Analysis of Concrete Frames using a Direct Stiffness Line Element Approach.
  Research Report No. R158. School of Civil and Environmental Engineering, The University of Adelaide, Australia.
• K.W. Wong, R.F. Warner, (1997). Behaviour of Reinforced Concrete Frames under Non-proportional Loadings.
  Research Report No. R146. School of Civil and Environmental Engineering, The University of Adelaide, Australia.
• J.M. Kenyon, R.F. Warner, (1992). Refined analysis of non-linear behaviour of concrete structures. Research Report No. R97. School of Civil and Environmental Engineering, The University of Adelaide, Australia.
• C.A.S. Smith, R.F. Warner, (1992). Design of Circular Concrete Columns using Spreadsheets. Research Report  No. R90. School of Civil and Environmental Engineering, The University of Adelaide, Australia.
• Khomwan N., Foster S.J., Smith S.T., (2005). Debonding failure in CFRP flexurally strengthened reinforced
  concrete beams. UNICIV Report R-440. School of Civil & Environmental Engineering, The University of New South Wales, Australia.
• Foster S.J., Malik A.R., (2002). Evaluation of compression failures in RC non-flexural members. UNICIV Report R-401. School of Civil & Environmental Engineering, The University of New South Wales, Australia.
• Guo X.H., Gilbert R.I., (2002). An experimental study of reinforced concrete flat slabs under sustained service
  loads. UNICIV Report R-407. School of Civil & Environmental Engineering, The University of New South Wales, Australia.
• Zaina M., Foster S.J., (2005). Modelling of fibre-reinforced HSC columns. UNICIV Report R-439. School of Civil & Environmental Engineering, The University of New South Wales, Australia.
• Zaina M., Foster S.J., (2005). Testing of concentric and eccentrically loaded fibre-reinforced HSC columns.
  UNICIV Report R-437. School of Civil & Environmental Engineering, The University of New South Wales, Australia.
• Kono S., Bechtoula H., Sakashita M., Tanakai H., Watanabe F., Eberhard M.O., (2006).
  Damage Assessment of Reinforced Concrete Columns Under High Axial Loading.
  ACI Special Publication, SP-237, Finite-Element Analysis of Reinforced Concrete Structures, Eds. L. Lowes and F. Filippou, American Concrete Institute, 2006, pp 165-176. Available from Marc O. Eberhard homepage, Department of Civil and Environmental Engineering
• Pla-Rucki G. and Eberhard M.O., (1995). Imaging of Reinforced Concrete: a State-of-the-Art Review. Journal of Infrastructure Systems, ASCE, June 1995, Vol. 1, No. 2, pp. 134-141. Available from Marc O. Eberhard
  homepage, Department of Civil and Environmental Engineering,
• Berry M. and Eberhard M.O., (2005). Practical Performance Model for Bar Buckling. Journal of Structural
  Engineering, ASCE, July 2005, Vol. 131, No, 7, pp1060-1070. Available from Marc O. Eberhard homepage,
  Department of Civil and Environmental Engineering,
• Ghandehari M., Zulli M., Shah S.P., (2000). Influence of Corrosion on Bond Degradation in Reinforced Concrete. Proceedings of the 14th Engineering Mechanics Conference, American Society of Civil Engineers, May 21-24, 2000.
• Karin Lundgren and Jonas Magnusson, (2000). Three-Dimensional Finite Element Analyses Of Anchorage Zones. Proceedings of the 14th Engineering Mechanics Conference, American Society of Civil Engineers, May 21-24, 2000.
• James V. Cox, Kristine Bergeron and Javier Malvar, (2000). A Combined Experimental and Numerical Study of
  the Bond between Lightweight Concrete and CFRP Bars. Proceedings of the 14th Engineering Mechanics
  Conference, American Society of Civil Engineers, May 21-24, 2000.
• Joana Roncero, Ravindra Gettu and Ignacio Carol, (2000). Effect of Chemical Admixtures on the Shrinkage of Cement Mortars. Proceedings of the 14th Engineering Mechanics Conference, American Society of Civil
  Engineers, May 21-24, 2000.
• Kejin Wang, W. Jason Weiss, Sanchun Yoon, and Surendra P. Shah, (2000). Combined Effect of Corrosion and Stresses In Reinforced Concrete Beams. Proceedings of the 14th Engineering Mechanics Conference, American
  Society of Civil Engineers, May 21-24, 2000.
• F. Meftah, W. Nechnech and J.M. Reynouard, (2000). An Elasto-Plastic Damage Model for Plain Concrete Subjected to Combined Mechanical and High Temperature Loads. Proceedings of the 14th Engineering
  Mechanics Conference, American Society of Civil Engineers, May 21-24, 2000.
• Kejin Wang, (2004). Proceedings of International Workshop on Sustainable Development and Concrete Technology, Beijing, China, May 20-21, 2004. Center for Transportation Research and Education, Iowa
  University, Ames, Iowa, USA.
• CP Tech Center, (2007). Guide to Concrete Overlay Solutions. National Concrete Pavement Technology Center, Iowa State University.
• CP Tech Center, (2006). Concrete Paving Training and Field Reference for Preventing Common Problems.
  National Concrete Pavement Technology Center, Iowa State University.
• Zsombor Kálmán Szabó, György L. Balázs, (2007).
  Near surface mounted FRP reinforcement for strengthening of concrete structures
  Periodica Polytechnica, Civil Engineering, 51/1, pp.33-38.
• Erika Csányi, György Balázs, Zoltán József Olasz, (2000).
  The Effect Of The Cement Type And Of Curing On The Mass And Deformations Of Hardened Cement Past
  Periodica Polytechnica, Civil Engineering, 44/2, pp. 151-177.
• György Balázs, Nguyen Huu Thanh, (2000).
  Long-term loading examinations in connection with the law of linear creep
  Periodica Polytechnica, Civil Engineering, 44/2, pp. 179-196.
• Tamás Kovács, (2000). Deterioration of reinforced concrete repair mortar layers. Periodica Polytechnica, Civil Engineering, 44/2, pp. 197-206.
• Marcus Klose. Design of Concrete Structures for Offshore Wind Turbines. A Paper, available from Risø National Laboratory, Wind Energy Department, Technical University of Denmark.
• Khong Hung, (2007).
  Application Of Laser Shearography For Detecting Microcracks In Concrete.
  MSc Thesis, Department of Civil Engineering, University of Maryland.
• Kim Haejin, (2003).
  Behavior and Performance of High Performance Concrete for Pavements.
  MSc Thesis, Department of Civil Engineering, University of Maryland.
• Sayed Sameer, (2004).
  Behavioral Study of Ultra High Performance Concrete Girders.
  MSc Thesis, Department of Civil Engineering, University of Maryland.
• Ceesay Jorgomai, (2007).
  Characterization of Damage in Mortar and Concrete Specimens due to Delayed Ettringite Formation (DEF).
  Dissertation, Department of Civil and Environmental Engineering, University of Maryland.
• Hunter Opio Konata, (2004).
  Characterization of Pore Structure and Crack Propagation in Concrete Using X-Ray Computed Tomography.
  MSc Thesis, Department of Civil Engineering, University of Maryland.
• Graybeal Benjamin Allen, (2005).
  Characterization of the Behavior of Ultra-High Performance Concrete.
  Dissertation, Department of Civil Engineering, University of Maryland.
• Bennie Stewart David, (2004).
  Development Of A Performance Based, Integrated Design/Selection Mixture
  Methodology For Fiber Reinforced Concrete Airfield Pavements.
  Dissertation, Department of Civil Engineering, University of Maryland.
• Ceesay Jorgomai, (2004).
  The Influence Of Exposure Conditions On Delayed Ettringite Formation In Mortar Specimens
  MSc Thesis, Department of Civil Engineering, University of Maryland.
• Larmie Ernest, (2005).
  Rehabilitation And Maintenance Of Road Pavements Using High Early Strength Concrete.
  MSc Thesis, Department of Civil and Environmental Engineering, University of Maryland.
• M. R. Hansen and Brenda L. Flottmeyer, (1998). Field Performance of Concrete Admixtures. Research Report No. SD97-09-F. South Dakota Department of Transportation, South Dakota School of Mines and Technology.
• V. Ramakrishnan, Kumar R. Santhosh, (2000). The Determination of the Permeability, Density, and Bond Strength of Non-Metallic Fiber Reinforced Concrete in Bridge Deck Overlay Applications. Technical Report No.
  SD1998-18-F. South Dakota Department of Transportation, South Dakota School of Mines and Technology.
• The European Guidelines for Self-Compacting Concrete - Specification, Production and Use, (2005). The
  European Project Group. European Federation for Specialist Construction Chemicals and Concrete Systems.
• Guidelines for Viscosity Modifying Admixtures for Concrete, (2006). European Federation of Concrete Admixture Associations (EFCA), European Federation for Specialist Construction Chemicals and Concrete Systems.
• J. Wallace, J. Stewart, A. Whittaker, (1999).
  Building Vulnerability Studies: Modeling and Evaluation of Tilt-up and Steel Reinforced Concrete buildings
  PEER Report 1999/13. Pacific Earthquake Engineering Research
  Center, College of Engineering, University of California, Berkeley.
• Klaus Juvas, Aulis Kappi, Kai Salo, Erik Nordenswan. The Effects of Cement Variations on Concrete Workability. Publication No. 26-3. Nordic Concrete Research.
• Marianne Tange Jepsen. Green Concrete. Publication No. 24-3. Nordic Concrete Research.
• Kare Johansen, Tor Arne Hammer. Drying Shrinkage of "Norwegian" Self-Compacting Concrete. Publication No. 27-4. Nordic Concrete Research.
• Harald Justnes, Erik J. Sellevold, Bert Reyniers. Chemical Shrinkage Of Cement Pastes With Plasticizing Admixtures. Publication No. 24-4. Nordic Concrete Research.
• Eric P. Koehler and David W. Fowler, (2003). Summary of Concrete Workability Test Methods. Research Report ICAR 105-1. International Center for Aggregates Research, The University of Texas at Austin.
• Alan F. Rauch, Carl T. Hass, Hyoungkwan Kim, and Craig Browne, (2000) . Evaluation of Potential Aggregate Grading Technologies - Rapid Test to establish grading of unbound Aggregate Products. Resrach Report ICAR
  503-1. International Center for Aggregates Research, The University of Texas at Austin.
• Alan F. Rauch, Carl T. Hass, Craig Browne and Hyoungkwan Kim, (2002).
  An Evaluation of Automated Devices to Replace and Augment Manual Sieve Analyses in Determining Aggregate Gradation - Rapid Test to establish grading of unbound Aggregate Products
  Research Report ICAR 503-2. International Center for Aggregates Research, The University of Texas at Austin.
• Carl T. Hass, Alan F. Rauch, Hyoungkwan Kim and Craig Browne, (2002). Automation of Aggregate Characterization Using Laser Profiling and Digital Image Analysis - Rapid Test to establish grading of unbound
  Aggregate Products. Research Report ICAR 503-3F. International Center for Aggregates Research, The
  University of Texas at Austin.
• A.S.K. Elkadi, (2005). Fracture scaling of concrete under multiaxial compression.
  PhD thesis in Civil Engineering, Delft University of Technology, Netherlands.
• A.M. Rashad , N.O. Farag, O. Hodhod, and M.M. Razik, (2008). Utilizing Experimental Model Test and Artificial Nueral-Nets to Estimate the Strength Loss of Heated Reinforced Concrete Columns. Asian Journal of Civil
  Engineering (Building & Housing), Vol. 9, No. 4, 391-409.
• R. Raveendra Babu, Gurmail, S. Benipal, Arbind, K. Singh, (2005). Constitutive Modelling of Concrete: An Overview. Asian Journal of Civil Engineering (Building and Housing), Vol. 6, No.4, pp. 211-246.
• N.M. Hawkins, D.A. Kuchma, R.F. Mast, M.L. Marsh, K-H Reineck, (2005).
  Simplified Shear Design of Structural Concrete Members
  National Cooperative Highway Research Program (NCHRP) Report 549. Transportation Research Board, Washington DC.
• Helen Sze Wai Chow, (2007).
  Analysis of Piled-Raft Foundations with Piles of Different Lengths and Diameters.
  PhD Thesis, School of Civil Engineering, The University of Sydney, Australia.
• B. Mezghiche, L. Zeghichi, R. Chebili, M. Mellas, (2006). Curing Methods of Precast Concrete Elements. Asian
  Journal of Civil Engineering (Building and Housing), Vol. 7, No. 6, pages 581-590.
• P. Pampanin, A. Amaris, U. Akguzel, and A. Palermo, (2006). Experimental Investigations on High-Performance Jointed Ductile Connections for Precast Frames
  1st European Conference on Earthquake Engineering and
  Seismology. A joint event of the 13th ECEE & 30th General Assembly of the ESC. Geneva, Switzerland.
• L. Schueremans, D. Van Gemert, S. Giessler, (2005).
  Chloride Penetration in RC-Structures in Marine Climate: in Site Survey, Analysis Model and Benefit of a Preventive Hydrophobic Treatment  International Workshop on Durability of Reinforced Concrete under Combined Mechanical and Climatic Loads (CMCL), Qingdao, China.
• L.T. Phan, N.J. Carino, (2003).
  Code Provisions for High Strength Concrete Strength-Temperature Relationships at Elevated Temperatures
  Materials and Structures, Vol. 36, No. 256, pages 91-98.
• L. Schueremans and D. Van Gemert, (1997). Service Life Prediction Model for Reinforced Concrete Constructions, Treated with Water-repellent Compounds. ConChem Conference and Exhibition, Düsseldorf,
  Germany.
• G. Cheok, W. Stone, J. Stanton, and D. Seagren, (1994). Beam-to-Column Connections for Precast Concrete Moment-Resisting Frames. Precast Seismic Structural Systems. 4th Joint Technical Coordinating Committee,
  Tsukuba, Japan.
• V. Gribniak, G. Kaklauskas, D. Bacinskas, (2008).
  Shrinkage in Reinforced Concrete Structures: A Computational Aspect. Journal of Civil Engineering and Management, International Research and Achievements. Vilnius:
  Technika, 2008, Vol. 14, No. 1, pp. 49-60.
• S. Khalfallah, (2008). Tension Stiffening Bond Modelling of Cracked Flexural Reinforced Concrete Beams. Journal of Civil Engineering and Management, International Research and Achievements. Vilnius: Technika, 2008, Vol. 14, No. 2, pp. 131-137.
• G. Arslan, (2008). Cracking Shear Strength of RC Slender Beams without Stirrups. Journal of Civil Engineering
  and Management, International Research and Achievements. Vilnius: Technika, 2008, Vol. 14, No. 3, pp. 177-
  182.
• Gaston Kruger, Olivier Burdet, Renaud Favre, (1998). Punching Tests on RC Flat Slabs with Eccentric Loading.
  2nd International Ph.D. Symposium in Civil Engineering at the Technical University of Budapest.
• Andrea Materschlager, Konrad Bergmeister, (1998). Fiber Added Concrete. 2nd International Ph.D. Symposium in Civil Engineering at the Technical University of Budapest.
• Markus Bruckner, Rolf Eligehausen, (1998). Minimum Reinforcement in RC Beams. 2nd International Ph.D.
  Symposium in Civil Engineering at the Technical University of Budapest.
• Adam Csikos, Istvan Hegedus, (1998) Torsion of Reinforced Concrete Beams. 2nd International Ph.D.
  Symposium in Civil Engineering at the Technical University of Budapest.
• S.R. Uma, and S.K. Jain, (2006). Seismic Design of Beam-Column Joints in RC Moment Resisting Frames- Review of Codes
  Structural Engineering and Mechanics, Vol. 23, No. 5, Pages 579-597.
• Kyoung-Kyu Choi, (2006). Shear Strength of Steel Fiber-Reinforced Concrete Beams without Web Reinforcement. ACI Structural Journal.
• .S. Army Corps of Engineers, (2005). Design and Construction of Conventionally Reinforced Ribbed Mat Slabs (RRMS). Unified Facilities Criteria (UFC), Report No. UFC 3-320-02A.
• Pradip Sarkar, Maidhily Govind and Devdas Menon, (2006). Estimation of Short-term Deflections in Two-way RC Slabs: Review of Code Provisions
  Proceedings of the 2nd International Congress on Computational Mechanics and Simulation (ICCMS06), December 8 - 10, 2006.
• Raveendra Babu. R and Gurmail S. Benipal, (2006). Plastic Modulus for Concrete. Proceedings of the 2nd
  International Congress on Computational Mechanics and Simulation (ICCMS06), December 8 - 10, 2006.
• M.V. Krishna Rao, P. Rathish Kumar, and N.V.R.C. Bala Bhaskar, (2008). Effect of Re-Vibration on Compressive Strength of Concrete
  Asian Journal of Civil Engineering (Building and Housing) Vol. 9, No. 3, pp. 291-301.
• Syed Abid Ali Shah, (2002). Effects of Various Parameters on Strength of the Column-Slab Joint Specimens.
  LACER, No. 7, pp. 191- 202.
• Hossam Saleh, (2000). Behaviour of Butt-Jointed Precast Columns. LACER No. 5, pp. 293- 304.
• Steen Rostam, (1998). Performance of Concrete in Aggressive Environments and the Feedback to Reliable NewPerformance Based Design
  Symposium on Performance of Concrete Structures in the Arabian Gulf Environment, Dhahran, Saudi Arabia, pp. 1-12.
• Bruce G. Smith, (1998). Microsilica Concrete, Towards 2000 in the Arabian Gulf Environment. KFUPM Symposium on Performance of Concrete Structures in the Arabian Gulf Environment, Dhahran, Saudi Arabia, pp. 120-134.
• Mohammed E. Haque, Murtuza Aluminiumwalla, (2004). A Virtual Tour of a Reinforced Concrete Building Construction. Proceedings of the 2004 American Society for Engineering Education Annual Conference &
  Exposition, 2004. American Society for Engineering Education.
• E.A. Ellobody and C.G. Bailey, (2008). Modelling of bonded post-tensioned concrete slabs in fire. Proceedings of ICE, Structures and Buildings 161, Issue SB6, pp. 311-323.
• C.G. Bailey and T. Lennon, (2008). Full-scale fire tests on hollowcore floors. The Structural Engineer, pp. 33-39.
• F. Giroldo and C.G. Bailey, (2008). Experimental bond behaviour of welded mesh reinforcement at elevated temperatures. Magazine of Concrete Research, Vol. 60, No. 1, pp. 23-31.
• Syed Ayub Azher, (2005).
  A prediction model for the residual flexural strength of corroded reinforced concrete beams
  Msc Thesis, King Fahd University of Petroleum & Minerals, Dhahran, Saudi Arabia.
• Adeeb Rahman, Mustafa Mahamid, Jeries Abou-Hanna, Faris Malhas, (2003).
  FE Nonlinear Analysis of Reinforced Concrete Thin Shells.
  The 16th ASCE Engineering Mechanics Conference, July 16 - 18, 2003, University of Washington, Seattle.
• Wang Tiecheng, Lu Mingqi, Wang Lai, (2003). Stress-Strain Relation for Concrete Under Triaxial Loading. The
  16th ASCE Engineering Mechanics Conference, July 16 - 18, 2003, University of Washington, Seattle.
• Sebastien Hentz, Laurent Daudeville, Frederic Donze, (2003). Modeling of Reinforced Concrete Structures Subjected to Impacts by the Discrete Element Method. The 16th ASCE Engineering Mechanics Conference, July
  16 - 18, 2003, University of Washington, Seattle.
• Collapse of Flying Formwork During Concrete Placement, (2002). Forensic Engineering in Construction Online
  Edition No. 8. Zallen Engineering.

 Deficiencies in Bracing of Lift Slab Buildings, (2004). Forensic Engineering in Construction Online Edition No. 11. Zallen Engineering.

• Rui Miguel Ferreira, (2004).
  Probability-Based Durability Analysis of Concrete Structures in Marine Environment.
  PhD Thesis, University of Minho, School of Engineering, Departament of Civil Engineering Campus de Azurem, Guimaraes, Portugal.
• Bard M. Pedersen, (2004).
  Alkali-Reactive and Inert Fillers in Concrete.
  PhD Thesis, Norwegian University of Science and Technology, Faculty of Engineering Science and Technology, Department of Structural Engineering.
• Anders Lindvall, (2001).
  Environmental Actions and Response: Reinforced Concrete Structures Exposed in Road and Marine Environments
  Thesis for the Degree of Licentiate of Engineering. Chalmers University of Technology, Department of Building Materials, Goteborg, Sweeden, Publication -01:3.
• L. Schueremans and D. Van Gemert, (1999). Effectiveness of Hydrophobic Treatment as Chloride Penetration Barrier - On Site Investigations and Service Life Prediction Model. Internationales Kolloquium, Werkstoffwissenschaften und bauinstandsetzen - MSR '99.
• J. Maeck, M. Abdel Wahab, G. De Roeck, (1998). Damage Detection in Reinforced Concrete Structures by Dynamic System Identification. Proceedings ISMA 23, Noise and Vibration Engineering, pages 939- 946, Leuven, Belgium.
• Miguel Ferreira, Said Jalali, Odd E. Gjorv, (2004). Software for Probability-Based Durability Analysis of Concrete Structures. Concrete under Severe Conditions: Environment & Loading. Proceedings of the 4th International Conference on Concrete under Severe Conditions, CONSEC'04, Seoul, Korea.
• A. Camoes, P. Rocha, B. Aguiar, S. Jalali, R. Delgado, (2004). Mechanical Properties of High-Performance Concrete with Fly Ash. Eighth CANMET/ACI International Conference on Flyash, Silica Fume, Slag and Natural
  Pozzolans in Concrete: Supplementary Papers. Las Vegas, U.S.A.
• L. Ramos, P. Lourenco, G. De Roeck, A. Campos-Costa, (2007). Vibration Signatures to identify Damage in Historical Constructions. International Conference Experimental Vibration Analysis For Civil Engineering Structures, EVACES'07, Porto, Portugal.
• E.B. Pereira, J.A.O. Barros, V.M.C.F. Cunha, S.P.F. Santos, (2005). Compression and Bending Behavior of Steel Fiber Reinforced Self-Compacting concrete. International Conference On Construction Materials: Performance, Innovations and Structural Implications (ConMat'05), Vancouver.
• J. Barros, E. Pereira, A. Ribeiro, V. Cunha, J. Antunes, (2004). Self-Compacting Steel Fibre Reinforced Concrete for Precasted Sandwich Panels: Experimental and Numerical Research. International Rilem Symposium on Fibre Reinforced Concrete, BEFIB'04, Varenna.
• J.O. Carneiro, S. Jalali, V. Teixeira, M. Tomas, (2005). The Effect of Concrete Strength and Reinforcement on Toughness of Reinforced Concrete Beams. Construction and Building Materials 19 (2005) 493-499. Elsevier Ltd.
• J-Z Xiao, J. Li, Z-F Huang, (2008). Fire Response of High-Performance Concrete Frames and Their Post-Fire Seismic Performance. ACI Structural Journal.
• K. Palacio, (2007). Advances on the Design of Thin Surface Structures in Reinforced Contrete. PhD Thesis, Universidade do Minho.
• L. Zeghichi, (2006). The Effect of Replacement of Naturals Aggregates by Slag Products on the Strength of Concrete. Asian Journal of Civil Engineering (Building and Housing), Vol. 7, No. 1, pages 27- 35.

 V.C. Li, H-J. Kong, and S.G. Bike, (2000). Fiber Reinforced High Performance Concrete Materials. Proceedings of High Performance Concrete Workability, Strength, and Durability, Vol. 1, pp. 71-86, C.K.Y. Leung, Z. Li, and J-T Ding (eds.), Hong Kong and Shen Zhen, China.

• Martin Zink, (2000). Diagonal Shear Cracking in Slender Concrete Beams. Lacer No. 5, pp. 305-332.
• S.M. Gupta, V.K. Sehgal, S.K. Kaushik, (2009). Shrinkage of High Strength Concrete. Proceedings of World
  Academy of Science, Engineering and Technology, Vol. 38, pp. 268 - 271. World Academy of Science, Engineering and Technology (WASET.ORG).
• E.S. Fraser, G.P.A.G. van Zijl, (2009). Computational Investigations of Concrete Footing Rotational Rigidity.
  Proceedings of World Academy of Science, Engineering and Technology, Vol. 38, pp. 523 - 532. World Academy of Science, Engineering and Technology (WASET.ORG).
• H. Abdul Razak and H. S. Wong, (2004). Re-Evaluation of Strength and Stiffness Relationships for High-Strength Concrete . Asian Journal of Civil Engineering (Building and Housing), Vol. 5, No. 1-2, pp. 85- 99.
• Mohammed Sharfuddin Ahmed, (1996). The Effect of Casting and Curing Temperatures on the Properties of Concrete.
  Msc Thesis, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia.
• Syed Imran Ali, (2003). Effects of Aggregate Quality on Reinforcement Corrosion.
  Msc Thesis, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia

<< Indice >> 

Alcuni dei titoli segnalati sono link a riviste internazionali o report interni di Università. L'articolo potrebbe non essere disponibile integralmente.

Per chi fosse interessato può contattarci Questo indirizzo e-mail è protetto dallo spam bot. Abilita Javascript per vederlo.